ShengYe is one of the leading chines manufacturers of polypropylene capacitors. The company based in
 Shunde / Foshan City has 500 employees and produces capacitors for white goods, air conditioners,
 small signal purposes and even ready to use line filter devices. ineltron focuses on the big capacitors for
 DC link and snubber applications. Filter and energy storage capacitors shall broaden our product line.

 Other ShengYe products are available on request.

DC link capacitors	DCL	DCLJ1 (4er-Kombination)
DCL series & DLJ1 with cooling fins

electrical data:

Rated Capacitance	160 μF～3200 μF（25°C）
Rated Voltage	600 VDC～2200 VDC
Tolerance	±10% (standard), ±5% (on request)
Dissipation factor	tanσ≤0.0002（100Hz，25°C)
Insulation resistor(RC)	≥20,000s（Un，25°C）
Operating temperature	-40°C～+85°C
Altitude	≤2000m
expectected lifetime	100,000 hours at Un and 70°C

100 % function: Every capacitor will be tested before leaving the factory
- for its dielectric strength. Proof voltage between the terminals applied is 1,5xUn / 10s at 25°C
- for its isolation between power terminals and housing:  3000VAC / 2s at 25°C

 

DCL series: standard types	C	øD	height	ESR	Irms - 10kHz	Irms - 10kHz	Irms - 10kHz	Rth	catalogue item no.
	[µF]	[mm]	[mm]	[mΩ]	40°C, [A]	55°C, [A]	70°C, [A]	[°C/W]
Un =600VDC
DCLSY600-650	650	86	100	2.56	50	33	13	5.3	I0600L6500UKN4BFA3N
DCLSY600-900	900	86	125	3.1	48	34	13	4.25	I0600L9000UKN4BFD3N
DCLSY600-950	950	86	140	0.99	70	47	21	5.63	I0600L9500UKN4BFE3N
DCLSY600-1300	1300	86	180	1.34	74	52	20	4.18	I0600L1301UKN4BFI3N
DCLSY600-1650	1650	86	230	1.82	70	49	18	3.44	IO600L1651UKN4BFK3N
DCLSY600-1000	1000	96	125	3.00	51	36	14	3.94	IO600L1001UKN4BGD3N
DCLSY600-1500	1500	96	180	1.10	82	58	22	4.10	IO600L1501UKN4BGI3N
DCLSY600-2000	2000	96	230	1.5	79	56	21	3.22	IO600L2001UKN4BGK3N
DCLSY600-1700	1700	116	140	0.52	100	64	31	4.88	IO600L1701UKN4BIE3N
DCLSY600-2350	2350	116	180	0.70	105	75	28	3.78	IO600L2351UKN4BII3N
DCLSY600-3200	3200	116	230	0.9	105	75	28	2.94	IO600L3201UKN4BIK3N
Un = 900VDC
DCLSY900-350	350	86	100	3.60	40	28	12	5.30	IO900L3500UKN4BFA3N
DCLSY900-470	470	86	125	4.80	39	27	11	4.27	IO900L4700UKN4BFD3N
DCLSY900-500	500	86	140	1.33	60	40	18	5.66	IO900L5000UKN4BFE3N
DCLSY900-700	700	86	180	1.80	62	44	18	4.37	IO900L7000UKN4BFI3N
DCLSY900-960	960	86	230	2.30	62	44	18	3.40	IO900L9600UKN4BFK3N
DCLSY900-630	630	96	125	3.50	48	33	13	3.91	IO900L6300UKN4BGD3N
DCLSY900-1000	1000	96	180	1.09	74	47	21	4.11	IO900L1001UKN4BGI3N
DCLSY900-1150	1150	96	230	1.90	70	50	20	3.20	IO900L1151UKN4BGK3N
DCLSY900-950	950	116	140	0.70	86	55	26	4.89	IO900L9500UKN4BIE3N
DCLSY900-1350	1350	116	180	0.90	94	66	27	3.74	IO900L1351UKN4BII3N
DCLSY900-1800	1800	116	230	1.20	93	65	24	2.94	IO900L1801UKN4BIK3N
Un =1100VDC
DCLSY1100-230	230	86	100	4.00	38	27	10	5.26	I1100L2300UKN4BFA3N
DCLSY1100-420	420	86	136	2.05	62	42	21	3.90	I1100L4200UKN4BFU3N
DCLSY1100-420-S	420	86	155	1.30	75	50	25	4.10	I1100L4200UKN4BFF3N
DCLSY1100-500	500	86	180	1.71	58	37	17	4.29	I1100L5000UKN4BFI3N
DCLSY1100-620	620	86	230	2.70	58	40	15	3.39	I1100L6200UKN4BFK3N
DCLSY1100-360	360	96	125	1.61	62	39	18	3.94	I1100L3600UKN4BGD3N
DCLSY1100-520	520	96	180	1.55	62	40	18	4.16	I1100L5200UKN4BGI3N
DCLSY1100-720	720	96	230	2.50	62	44	17	3.22	I1100L7200UKN4BGK3N
DCLSY1100-400	400	116	100	2.50	52	37	14	4.45	I1100L4000UKN4BIA3N
DCLSY1100-600	600	116	140	0.89	76	49	23	4.92	I1100L6000UKN4BIE3N
DCLSY1100-920	920	116	180	1.10	87	62	23	3.64	I1100L9200UKN4BII3N
DCLSY1100-1020	1020	116	230	1.80	73	52	21	3.08	I1100L1021UKN4BIK3N
DCLSY1100-1100	1100	116	230	1.60	79	56	22	2.99	I1100L1101UKN4BIK3N
DCLSY1100-1200	1200	116	230	1.50	83	60	23	2.89	I1100L1201UKN4BIK3N
DCLSY1100-1200-S	1200	116	248	0.80	120	90	48	2.70	I1100L1201UKN4BIU3N
Un = 1200VDC
DCLSY1200-330	330	86	140	3.5	50	35	20	3.42	I1200L3300UKN4BFE3S
DCLSY1200-350	350	96	136	0.90	80	59	34	5.32	I1200L3500UKN4BGU3N
DCLSY1200-500	500	116	136	0.70	93	66	38	4.92	I1200L5000UKN4BIU3N
Un = 1300 VDC
DCLSY1300-160	160	86	100	2.90	45	31	12	5.25	I1300L1600UKN4BFA3N
DCLSY1300-210	210	86	125	5.20	37	26	10	4.26	I1300L2100UKN4BFD3N
DCLSY1300-330	330	86	180	2.60	52	37	14	4.27	I1300L3300UKN4BFI3N
DCLSY1300-470	470	86	230	3.30	52	36	14	3.42	I1300L4700UKN4BFK3N
DCLSY1300-250	250	96	125	5.40	38	27	10	3.94	I1300L2500UKN4BGD3N
DCLSY1300-400	400	96	180	1.86	56	36	16	4.16	I1300L4000UKN4BGI3N
DCLSY1300-500	500	96	230	2.90	57	40	15	3.22	I1300L5000UKN4BGK3N
DCLSY1300-420	420	116	140	1.06	70	45	21	4.90	I1300L4200UKN4BIE3N
DCLSY1300-600	600	116	180	1.12	77	49	22	3.74	I1300L6000UKN4BII3N
DCLSY1300-820	820	116	230	1.70	78	55	21	2.91	I1300L8200UKN4BIK3N
Un = 2000 VDC
DCLSY2000-160	160	86	230	3.74	44	28	13	3.39	I2000L1600UKN4BFD3N
DCLSY2000-300	300	116	230	2.00	65	41	18	2.93	I2000L3000UKN4BIK3N
Un = 2200 VDC
DCLSY2200-160	160	86	230	3.74	44	28	13	3.39	I2200L1600UKN4BFK3N
DCLSY2200-385	385	116	293	1.81	67	43	20	3.03	I2200L3850UKN4BIU3N

You are looking for other combinations of housing sizes, voltage class and / or capacitance? -> Please send your request!

More Details can be found here: DCL series (pdf)

 

Applications:
- DC link & DC filter in inverters and converters
- replacement of aluminium electrolytic capacitors (less capacacity, but higher currents)

capacitors for high thermal duties offers the series DCLJ1
in anodized aluminium housing with cooling fins 

2 versions: connections by nuts or screws available	the stable aluminium housing allows the parallel mounting in groups to get big capacitor banks
DCLJ1 housing	Example for 6-pack capacitor parallel setup. ShengYe offers ready-to-use combinations of 2, 4 or 6 capacitors.

 

DCLJ1 series: standard types	C	øD	height	ESR	Irms - 10kHz	Irms - 10kHz	Irms - 10kHz	Rth	catalogue item no.
	[µF]	[mm]	[mm]	[mΩ]	40°C, [A]	55°C, [A]	70°C, [A]	[°C/W]
Un = 600 VDC
DCLSY600-500	500	86	83	1.69	52	38	18	6.03	I0600L5000UKN4PFU3N
DCLSY600-620	620	86	98	1.08	70	44	20	4.73	I0600L6200UKN4PFA3N
DCLSY600-900	900	86	123	1.13	76	48	21	3.76	I0600L9000UKN4PFD3N
DCLSY600-950	950	86	138	0.99	70	44	20	5.18	I0600L9500UKN4PFE3N
DCLSY600-1300	1300	86	178	1.08	76	48	22	4.00	I0600L1301UKN4PFI3N
DCLSY600-1700	1700	86	228	1.13	84	52	23	3.10	I0600L1701UKN4PFK3N
DCLSY600-2900	2900	128	178	0.46	123	75	35	3.43	I0600L2901UKN4PJI3N
DCLSY600-4000	4000	128	228	0.48	135	81	38	2.63	I0600L4001UKN4PJK3N
Un = 900 VDC
DCLSY900-220	220	86	73	1.78	40	27	15	9.58	I0900L2200UKN4PFU3N
DCLSY900-350	350	86	98	1.44	60	38	17	4.73	I0900L3500UKN4PFA3N
DCLSY900-480	480	86	123	1.51	66	42	18	3.76	I0900L4800UKN4PFD3N
DCLSY900-500	500	86	138	1.33	60	38	17	5.12	I0900L5000UKN4PFE3N
DCLSY900-700	700	86	178	1.43	66	42	19	4.00	I0900L7000UKN4PFI3N
DCLSY900-960	960	86	228	1.50	73	46	20	3.09	I0900L9600UKN4PFK3N
DCLSY900-1650	1650	128	178	0.61	107	66	30	3.41	I0900L1651UKN4PJI3N
DCLSY900-2250	2250	128	228	0.64	117	70	32	2.63	I0900L2251UKN4PJK3N
Un = 1100 VDC
DCLSY1100-230	230	86	98	1.76	55	35	16	4.69	I1100L2300UKN4PFA3N
DCLSY1100-310	310	86	123	1.87	59	37	17	3.75	I1100L3100UKN4PFD3N
DCLSY1100-420	420	86	138	1.62	62	38	19	3.34	I1100L4200UKN4PFE3N
DCLSY1100-500	500	86	178	1.75	60	38	17	3.96	I1100L5000UKN4PFI3N
DCLSY1100-620	620	86	228	1.87	65	41	18	3.08	I1100L6200UKN4PFK3N
DCLSY1100-1050	1050	128	178	0.77	95	58	27	3.42	I1100L1051UKN4PJI3N
DCLSY1100-1450	1450	128	228	0.80	105	63	28	2.62	I1100L1451UKN4PJK3N
Un = 1300 VDC
DCLSY1300-160	160	86	98	2.11	50	32	14	4.68	I1300L1600UKN4PFA3N
DCLSY1300-210	210	86	123	2.31	52	33	15	3.78	I1300L2100UKN4PFD3N
DCLSY1300-220	220	86	138	2.02	48	31	14	5.23	I1300L2200UKN4PFE3N
DCLSY1300-330	330	86	178	2.10	54	35	16	3.95	I1300L3300UKN4PFI3N
DCLSY1300-470	470	86	228	2.30	58	37	17	3.11	I1300L4700UKN4PFK3N
DCLSY1300-730	730	128	178	0.92	86	54	25	3.41	I1300L9300UKN4PJI3N
DCLSY1300-1000	1000	128	228	0.96	95	57	25	2.63	I1300L1001UKN4PJK3N
Un = 2000 VDC
DCLSY2000-160	160	86	228	3.74	46	27	13	3.08	I2000L1600UKN4PFK3N
DCLSY2000-360	360	128	228	1.61	74	44	21	2.63	I2000L3600UKN4PJK3N

For more details please refer to the short form datasheet: DCLJ1 series (pdf)

Examples of factory made capacitor banks made of the DCLJ1 types:

cumulative capacitance  [µF]	specification of the setup	qty. of	width	length	height	Irms
		capacitors	[mm]	[mm]	[mm]	(10kHz, 40°C)
Un=600Vdc
8000	DCLJ1SY600-4000	2	256	128	228	216
16000	DCLJ1SY600-4000	4	256	256	228	432
24000	DCLJ1SY600-4000	6	384	256	228	648
Un=800Vdc
4500	DCLJ1SY800-2250	2	256	128	228	187
9000	DCLJ1SY800-2250	4	256	256	228	374
13500	DCLJ1SY800-2250	6	384	256	228	561
Un=1200Vdc
4000	DCLJ1SY1200-1000	4	256	256	228	304
6000	DCLJ1SY1200-1000	6	384	256	228	456
Un=1500Vdc
2880	DCLJ1SY1500-720	4	256	256	228	278
4320	DCLJ1SY1500-720	6	384	256	228	417
Un=1800Vdc
1760	DCLJ1SY1800-440	4	256	256	228	246
2640	DCLJ1SY1800-440	6	384	256	228	370
Un=2000Vdc
720	DCLJ1SY2000-360	2	256	128	228	118
1440	DCLJ1SY2000-360	4	256	256	228	237
2160	DCLJ1SY2000-360	6	384	256	228	355
2880	DCLJ1SY2000-360	8	512	256	228	474

 

Series DCLJ2 in box

FEATURES -High Irms rating -High Ipeak rating -Low self-inductance -High reliabilty and life expectancy -Non-polar APPLICATION - Static reactive power Generator- STATCOM - HVDC - Wind power converter - High power welding machine

Details regarding those boxed capacitors can be found here: DCLJ2 series (pdf)

 

Impulse and AC filter capacitors	EST	FFC1        &         FFC3
Series EST & FFC1 / FFC3

 

The impulse and power storage capacitors of the EST series are able to handle a current Ipeak up to 3A per µF.

capacitance range between 500µF and 2000µF
standard tolerance is 10%, selections down to 5% are available as well.
ShengYe ensures an expected duty of 20 mio cycles in this series.

Applications of the EST series:
- welding - impulse generators - magnetic resonance - laser power supply / medical applications

 

EST series	Volts	C [µF]	øD [mm]	height [mm]	connections [mm] type A and B		catalogue item number
ESTSY500-500	500	500	65	230	12	16	J0500M5000UKN1DDK1P
ESTSY500-1000	500	1000	86	165	12	16	J0500M1001UKN1DFG1P
ESTSY1100-1000	1100	1000	96	230	12	16	J1000M1001UKN1DGK1P
ESTSY1100-2000	1100	2000	136	285	16	25	J1100M2001UKN1DKM1P
ESTSY1500-500	1500	500	106	290	16	25	J1500M5000UKN1DHN1P
ESTSY2500-200	2500	200	106	310	16	25	J2500M2000UKN1DHO1P

More details regarding energy storage EST series: EST series (pdf)

 

Filter capacitors for AC filtering type FFC1 (=single phase) capacitance 30µF to 270µF (@ 25°C) voltage classes: 230VAC - 1000 VAC Dissipation factor tan delta <= 0,0002 (@100Hz, 25°C) Temperature: -40 to +85°C expected lifetime: min. 100.000 hours (@ Un and temperature <= 70°C)

More technical details to the unipolar filter capacitors here: FFC1 series (pdf)

 

Filter capacitors for AC filter FFC3 (=three phase)

capacitance	3*22μF to 3*300.9 μF（@ 25℃）
Voltages	230VAC to 850VAC
Tolerance	±10% (standard), ±5% (selected on request)
Dielectrics	Metallized PP
Dissipation factor	tanδ≤0.0002（100Hz，25℃）
Operating temperature (Tw)	-40℃～+70℃
Storage temperature (Ts)	-40℃～+85℃
altitude limit	≤2000m
expected minimum lifetime	100,000 hours at Un and Th≤70℃
Test voltage between terminals	1.25Un(AC) / 10s at 25℃ or 1.75Un(DC) / 10s at 25℃
Test voltage terminal to case	3000VAC / 2s at 25℃, 50/60Hz
Construction	filled with gas- or silicone oil, none inductive, positive pressure inside
Case	Aluminium case

More details: FFC3 datasheet (pdf)

 

Snubber capacitors

Series SNUT1 with tinned copper lugs and SNUT2 / SNUT3 with cylindrical body

Features:

-self healing, highest possible reliability against impulses of discharges and ripple currents
-adapted to the grid spacing of common IGBT modules, for direct mounting at emitter and collector terminals
-high reliability and life expectancy up to 85°C operating temperature

	capacitance SNUT1 series	0.33μF to 6.8μF（25℃）
	voltage classes	700VDC to 2500VDC
	Tolerance	±10% (standard), ±5% (on request)
	dielectric	Metallized PP
	Dissipation factor	tanδ≤0.0006（1000Hz，25℃）
	Insulation resistor (RC)	C≤0.33μF,RC≥15000S; C＞0.33μF,RC≥5000S
	Operating temperature (Tw)	-40℃ bis+85℃
	Hotspot temperature (Th)	≤+85℃
	Storage temperature (Ts)	-40℃ bis +85℃
	altitude limit	≤2000m
	life expectancy	100,000 hours at Un and Th≤70℃
	Test voltage between terminals	1.5Un / 10s at 25℃
	Aufbau	Dry type, with resin sealing, Non-inductive, Antiflaming
	Case & Leading	Plastic case， tinned copper lugs for screw fixing or soldering

 

	capacitance SNUT2 series	5μF to 100μF（25℃）
	voltage classes	800VDC to 1000VDC
	tolerance	±10% (standard), ±5% (on request)
	dielectric	metallized PP
	Dissipation factor	tanδ≤0.0002 （1000Hz，25℃）
	Insulation resistor (RC)	C≤0.33μF,RC≥15000S; C＞0.33μF,RC≥5000S
	Operating temperature (Tw)	-40℃ to +85℃
	Hotspot temperature (Th)	≤+85℃
	Storage temperature (Ts)	-40℃ to +85℃
	altitude limit	≤2000m
	life expectancy	100,000 hours at Un and Th≤70℃
	Test voltage between terminals	1.5Un / 10s at 25℃
	construction	Dry type, with resin sealing, non-inductive, antiflaming
	Case & Leading	cylindrical construction, axial screw connections

 

	capacitance SNUT3 series	0,1μF to 6,8μF（25℃）
	voltage classes	700VDC to 3000VDC
	tolerance	±10% (standard), ±5% (on request)
	dielectric	Metallized PP
	Dissipation factor	tanδ≤0.0002 （1000Hz，25℃）
	Insulation resistor (RC)	C≤0.33μF,RC≥15000S; C＞0.33μF,RC≥5000S
	Operating temperature (Tw)	-40℃ to +85℃
	Hotspot temperature (Th)	≤+85℃
	Storage temperature (Ts)	-40℃ to +85℃
	altitude limit	≤2000m
	life expectancy	100,000 hours at Un and Th≤70℃
	Test voltage between terminals	1.5Un / 10s at 25℃
	construction	Dry type, with resin sealing, Non-inductive, Antiflaming
	Case & Leading	cylindrical construction, axial soldering connections

More details regarding the SNUT series for snubber purposes: SNUT series (pdf)

 

PFC capacitors (power factor correction)

Series TMPD1, TMPD3, TMPDsplit

Features:
-positive pressure system, self healing. ShengYe was the first manufacturer in China who offered gas filled capacitors
-H type with dual protection against overtemperature: besides a mechanical overpressure cutoff, a patented electronic temperature controller is built in.
-very low impedance and heat loss ensure longest possible service life of your device
-outstanding reliability and life time up to 85°C operating temperature
-TÜV accredited and CE conform.
-failure rate less than 6% after 60.000 hours of operating at full nominal voltage and 25°C
-tolerance, temperature and allowed operating altitude better than european /international standards

TMPD1 (single phase PFC-capacitors)

Application Condition	industrial standard	ShengYe standard
Temperature	25℃/+50℃	-40℃/+70℃
Altitude	≤2000m	≤5000m
Relative Humidity	≤95%	≤95%
Regular Parameter
Rated Voltage（Un）	250V	Any Voltage stage is available up to 1KV
Rated Frequency（fn）	50Hz	60Hz or other stage
Rated Capacity（Qn）	5~15 kvar	2.5~100kvar
Capacity Tolerence	-5%~+10%	±3%
Interphase Imbalance	≤1.08	≤1.04
Loss Tangent	tgδ≤0.001	tgδ≤0.001
Max.Vt-t	2.15Un/5S	≥2.5Un/5S
Max.Vt-c	3600V/2S	5000V/2S
Self-Discharge	Less than 75V after 3min disconnection	1min or less
Running Parameter
Proof- Voltage	1.1 Un	1.35 Un
Proof- Current	1.3 In	2.0 In
Reliabilty
Life expectancy	1ppm element hour, failure rate is less than 6%/0.5% after running 60000 hours, meeting the requirment of Standard EIA-456-A
Explosion protection	(Over-)pressure protection

connection type: "L-terminal"

TMPD1 series	Voltage （V）	Capacity （kvar)	Capacitance （uF)	Current （A）	Dimensions （mm）	Packing (pcs/box)
TMPDSY250-5-1	250	5	254.8	20.0	ø76×175-M12*16	7
TMPDSY250-7.5-1	250	7.5	382.2	30.0	ø76×240-M12*16	7
TMPDSY250-10-1	250	10	509.6	40.0	ø86×240-M12*16	5
TMPDSY250-15-1	250	15	764.3	60.0	ø106×240-M16*25	3
TMPDSY450-15-1	450	15	235.9	33.3	ø86×240-M12*16	5
TMPDSY450-20-1	450	20	314.5	44.4	ø96×240-M16*25	4
TMPDSY480-15-1	480	15	207.3	31.3	ø86×240-M12*16	5
TMPDSY480-20-1	480	20	276.5	41.7	ø106×240-M16*25	3

Other specifications are available on request. Please send your detailed inquiry.

 

TMPD3 (three phase PFC capacitors)

TMPD3 series	Voltage （V）	Capacity （kvar)	Capacitance （uF)	Current （A）	Dimensions （mm）	Packing (pcs/box)
TMPDSY400-5-3	400	5	99.5	7.2	ø76×175-M12*16	7
TMPDSY400-7.5-3	400	7.5	149.3	10.8	ø76×240-M12*16	7
TMPDSY400-10-3	400	10	199.0	14.4	ø76×240-M12*16	7
TMPDSY400-12-3	400	12	238.9	17.3	ø86×240-M12*16	5
TMPDSY400-15-3	400	15	298.6	21.7	ø96×240-M16*25	4
TMPDSY400-20-3	400	20	398.1	28.9	ø106×240-M16*25	3
TMPDSY400-25-3	400	25	497.6	36.1	ø106×285-M16*25	3
TMPDSY400-30-3	400	30	597.1	43.3	ø116×285-M16*25	3
TMPDSY415-5-3	415	5	92.5	7.0	ø76×175-M12*16	7
TMPDSY415-7.5-3	415	7.5	138.7	10.4	ø76×240-M12*16	7
TMPDSY415-10-3	415	10	184.9	13.9	ø76×240-M12*16	7
TMPDSY415-12-3	415	12	221.9	16.7	ø86×240-M12*16	5
TMPDSY415-15-3	415	15	277.4	20.9	ø96×240-M16*25	4
TMPDSY415-20-3	415	20	369.8	27.8	ø106×240-M16*25	3
TMPDSY415-25-3	415	25	462.3	34.8	ø116×240-M16*25	3
TMPDSY415-30-3	415	30	554.7	41.7	ø116×285-M16*25	3
TMPDSY450-5-3	440	5	82.2	6.6	ø76×175-M12*16	7
TMPDSY450-7.5-3	440	7.5	123.4	9.8	ø76×175-M12*16	7
TMPDSY450-10-3	440	10	164.5	13.1	ø76×240-M12*16	7
TMPDSY450-12-3	440	12	197.4	15.7	ø76×240-M12*16	7
TMPDSY450-15-3	440	15	246.7	19.7	ø86×240-M12*16	5
TMPDSY450-20-3	440	20	329.0	26.2	ø96×240-M16*25	4
TMPDSY450-25-3	440	25	411.2	32.8	ø106×240-M16*25	3
TMPDSY450-30-3	440	30	493.5	39.4	ø116×240-M16*25	3
TMPDSY480-5-3	480	5	69.1	6.0	ø76×175-M12*16	7
TMPDSY480-7.5-3	480	7.5	103.7	9.0	ø76×175-M12*16	7
TMPDSY480-10-3	480	10	138.2	12.0	ø76×240-M12*16	7
TMPDSY480-12-3	480	12	165.9	14.4	ø86×240-M12*16	5
TMPDSY480-15-3	480	15	207.3	18.0	ø86×240-M12*16	5
TMPDSY480-20-3	480	20	276.5	24.1	ø106×240-M16*25	3
TMPDSY480-25-3	480	25	345.6	30.1	ø116×240-M16*25	3
TMPDSY480-30-3	480	30	414.7	36.1	ø116×285-M16*25	3
TMPDSY525-5-3	525	5	57.8	5.5	ø76×175-M12*16	7
TMPDSY525-7.5-3	525	7.5	86.7	8.2	ø76×240-M12*16	7
TMPDSY525-10-3	525	10	115.5	11.0	ø76×240-M12*16	7
TMPDSY525-12-3	525	12	138.7	13.2	ø86×240-M12*16	5
TMPDSY525-15-3	525	15	173.3	16.5	ø96×240-M16*25	4
TMPDSY525-20-3	525	20	231.1	22.0	ø106×240-M16*25	3
TMPDSY525-25-3	525	25	288.9	27.5	ø116×240-M16*25	3
TMPDSY525-30-3	525	30	346.6	33.0	ø116×285-M16*25	3
TMPDSY690-5-3	690	5	100.3	4.2	ø76×175-M12*16	7
TMPDSY690-7.5-3	690	7.5	150.5	6.3	ø76×240-M12*16	7
TMPDSY690-10-3	690	10	200.7	8.4	ø76×240-M12*16	7
TMPDSY690-12-3	690	12	240.8	10.0	ø86×240-M12*16	5
TMPDSY690-15-3	690	15	301.0	12.6	ø96×240-M16*25	4
TMPDSY690-20-3	690	20	401.4	16.7	ø106×240-M16*25	3
TMPDSY690-25-3	690	25	501.7	20.9	ø106×285-M16*25	3
TMPDSY690-30-3	690	30	602.0	25.1	ø116×285-M16*25	3

Other capacitances / dimensions / electrical specifications are available on request..

 

TMPDsplit (three phase PFC capacitors with connection for neutral wire)

Split phase compensation capacitors (with F terminal connections) offer additionally 1-2 connections to pull down the delta point to neutral. The phase compensation capacitor will work in any delta or star and multimode connection to meet total compensation, phase comepnsation and composite compensation requirements.

TMPDsplit series	Voltage （V）	Capacity （kvar)	Capacitance （uF)	Current （A）	Dimensions （mm）	Packing (pcs/box)
TMPDSY250 -5-3	433	5	254.8	6.7	ø96×175-M16*25	4
TMPDSY250 -6-3	433	6	305.8	8.0	ø96×175-M16*25	4
TMPDSY250 -7.5-3	433	7.5	382.2	10.0	ø96×175-M16*25	4
TMPDSY250 -10-3	433	10	509.6	13.3	ø96×240-M16*25	4
TMPDSY250 -15-3	433	15	764.4	20.0	ø96×285-M16*25	4
TMPDSY250 -20-3	433	20	1019.2	26.7	ø116×285-M16*25	3
TMPDSY250 -24-3	433	24	1223.0	32.0	ø116×285-M16*25	3

TMPD box

TMPD box series	Voltage （V）	Capacity （kVAr)	Capacitance （uF)	Current （A）	Dimensions （mm）	Packing (pcs/box)
TMPDSY 250-40-1	250	40	2038.2	92.4	275*95*370	3
TMPDSY 250-50-1	250	50	2547.8	115.5	275*95*370	3
TMPDSY 250-60-1	250	60	3057.3	138.6	245*164*370	2
TMPDSY 440-40-3	440	40	658.0	52.5	275*95*370	3
TMPDSY 440-50-3	440	50	822.5	65.6	275*95*420	3
TMPDSY 440-60-3	440	60	987.0	78.7	275*95*420	3
TMPDSY 450-40-3	450	40	629.1	51.3	275*95*370	3
TMPDSY 450-50-3	450	50	786.3	64.2	275*95*370	3
TMPDSY 450-60-3	450	60	943.6	77.0	245*164*370	2
TMPDSY 450-70-3	450	70	1100.9	89.8	245*164*370	2
TMPDSY 450-75-3	450	75	1179.5	96.2	245*164*370	2
TMPDSY 480-40-3	480	40	552.9	48.1	275*95*370	3
TMPDSY 480-50-3	480	50	691.1	60.1	275*95*420	3
TMPDSY 480-60-3	480	60	829.4	72.2	275*95*420	3
TMPDSY 525-40-3	525	40	462.2	44.0	275*95*370	3
TMPDSY 525-50-3	525	50	577.7	55.0	275*95*420	3
TMPDSY 525-60-3	525	60	693.3	66.0	245*164*370	2
TMPDSY 690-40-3	690	40	802.7	33.5	275*95*370	3
TMPDSY 690-50-3	690	50	1003.4	41.8	275*95*370	3
TMPDSY 690-60-3	690	60	1204.1	50.2	275*95*420	3

All presented ShengYe foil capacitors are RoHS compliant..

 

---

Ineltron is contract distributor of Mitsubishi (power semiconductors), Powerex, Powersem, InPower, eldre (now Mersen)
and Isahaya Electronics.. Heat sinks, assembly components and capacitors complete our product range for the power electronic sector.

INELTRON GmbH, Hugenottenstr. 30, 61381 Friedrichsdorf, Germany
phone:  + 49 6172 59 88 09     fax:  +49 6172 75933     E-Mail:  info@ineltron.de

Capacitors